Thing Mingle - Find your 3D Print tools

3D printing for people who actually print things

Calibration Log
Drop a sliced G-code, a slicer profile or a 3MF project and the printer, spool and settings are read from it. Drop a tuning tower and its bands are laid out so you set the height of the best one and get the value. Each printer and spool keeps the values you landed on, shows where your slicer disagrees, and goes to the machine as a spool label, a firmware G-code block, or the slicer fields to type in. → Read your slicer's G-code, profiles and tuning towers instead of retyping them, keep the value you landed on per printer and spool, and see where your slicer has drifted from it.
Model Print Inspector
Drop in an STL or 3MF and turn it in 3D. Overhangs that need support and walls too thin to print are shaded on the model, every sensible orientation is ranked by the support it needs, and the parts go on a to-scale bed for your printer. Take the plate to your slicer as a 3MF. → See what a model will need before slicing it — support underneath, walls too thin to print, holes in the mesh — compare orientations by the support each needs, and lay the parts out on your printer's bed.